Result:0002769

From MediaWiki
Material name DreamScape Type II Wall Vinyl printed with EFI-3M SuperRange XF V3 inks
Manufacturer DreamScape, a division of Roysons Corp.; EFI (Electronics for Imaging)
Supplier
Test result original Unsuitable
Result resume
Test result public Unsuitable
Copper result A: OK (spot of corrosion at site of puncture during coupon preparation); B: OK; Overall: P
Silver result A: OK; B: OK; Overall: P
Lead result A: Thick Yellow/green compacted corrosion (U); Light white compacted corrosion (T/U) - previously called ‘light white haze)’; Thin orange compacted corrosion (T); B: Thick Yellow/green compacted corrosion (U); Light white compacted corrosion (T/U) - previously called ‘light white haze)’; Thin orange compacted corrosion (T); Overall: U
Date tested 2020/12/03
Tester AMNH
Test used Oddy Test
Description of tested material Fabric liner was removed prior to weighing. Sample was cut to weight and adhered to tared Mylar to simulate anticipated use as a graphics material
Composition of tested material Single sheet of embossed wallpaper vinyl face with laminated fabric backing, R2R printed with EFI-3M SuperRange XF V3 inks (#303-#306). Backing is poly-cotton woven or polyester/pulp non-woven depending on emboss. Sample was printed on 06/22/20; allow for 28 days of off-gassing
Comments Test ID: 355; Control ID: C33; Lid components A: New; Lid components B: Reused (T:1)
Color
Material type composite
Use type sheet/membrane (flexible)
Intended use Display
Is in use No
Control coupons file
GCMS results file
Result image