Result:0002736
From MediaWiki
| Material name | MAX-metal DP (Digitally Printable) aluminum composite board printed with VUTEk GSLX SER 3 & SER 4 inks |
|---|---|
| Manufacturer | Grimco, VUTEk |
| Supplier | |
| Test result original | Temporary |
| Result resume | |
| Test result public | Temporary |
| Copper result | A: OK; B: OK; Overall: P |
| Silver result | A: OK; B: OK; Overall: P |
| Lead result | A: Darkening (T); B: Darkening (T); Blue tarnish (T); Overall: T |
| Date tested | 2020/10/09 |
| Tester | AMNH |
| Test used | Oddy Test |
| Description of tested material | Sample was scored with a table saw and pieces were broken off to make weight. Protective film liners were removed prior to weighing. |
| Composition of tested material | Approximately 12 x 12 sheet of Grimco MAX-metal 1/8 aluminum composite material comprised of two .15mm aluminum panels (coated with a white matte finish designed for digital and screen printing), bonded to a solid polyethylene core (#321). Sample is direct printed with VUTEk GSLX SER 3 & SER 4 inks (#307-#311). Remove protective films before testing. Sample was printed on 06/22/20; allow for 28 days of off-gassing. |
| Comments | Test ID: 322; Control ID: C29; Lid components A: New; Lid components B: Reused (T:1) |
| Color | |
| Material type | composite |
| Use type | Board - composite |
| Intended use | Display |
| Is in use | Yes - with restrictions |
| Control coupons file | |
| GCMS results file | |
| Result image |
