Result:0002730
From MediaWiki
| Material name | LAG JET E-2200ZC |
|---|---|
| Manufacturer | LINTEC Corporation |
| Supplier | |
| Test result original | Permanent |
| Result resume | |
| Test result public | Permanent |
| Copper result | A: OK; B: OK; Overall: P |
| Silver result | A: OK; B: OK; Overall: P |
| Lead result | A: OK; B: OK; Possible beginning of very slight yellowing; Overall: P |
| Date tested | 2020/09/15 |
| Tester | AMNH |
| Test used | Oddy Test |
| Description of tested material | Film liner was removed. Sample was cut to weight and adhered to tared strip of Mylar |
| Composition of tested material | Approximately 12 x 12 sheet of PSA film comprised of face stock (polyethylene terephthalate, silica, acrylic based resin), adhesive (acrylic ester co-polymer, UV absorbent), and release liner (polyethylene terephthalate, silica, silicone); adhesive is inherent in vinyl sample |
| Comments | Test ID: 315; Control ID: C26; Lid components A: New; Lid components B: Reused (T:1) |
| Color | |
| Material type | synthetic/polymer |
| Use type | sheet/membrane (flexible) |
| Intended use | Display |
| Is in use | NA |
| Control coupons file | |
| GCMS results file | |
| Result image |
